FEP-FS High Molecular Weight Film
CHEMFILM® FEP-FS film is made from high molecular weight fluorinated ethylene propylene resin for applications where high flex life and stress-crack-resistant performance are required, such as tank linings and diaphragms. It temperature performance range and resistance to chemical attack make it an ideal candidate for chemical processing. The film meets or exceeds the requirements of ASTM D-3368 (Specification for FEP-Fluorocarbon Resin Sheet and Film) for type III material.
| Features | Benefits |
|---|---|
| High Molecular weight resin | Excellent stress crack resistance and flex life |
| Chemically inert | Exceptional chemical resistance in aggressive environments |
| Very low surface energy | Outstanding anti-stick release properties |
| Functional temperature range from -254°C (-425°F) to 205°C (400°F) | Suitable for Cryogenic and High temperature applications |
| Super dielectric properties | Excellent electrical insulation properties |
| Available with pigment | For easy identification |
| Available with C-Treatment | Provides cementable surface on one or both sides of the film |
CHEMFILM® FEP-FS Fluoropolymer Film Typical Physical Properties*
| Typical Properties | Test Method | Value | Units |
|---|---|---|---|
| General | |||
| Specific Gravity | ASTM D-792 | 2.12-2.17 | |
| Yield (1 mil) | 18 (90) | m2/kg (ft2/lb) | |
| Mechanical | |||
| Tensile Strength | ASTM D-882 | 17.24 (2500) | MPa (psi) |
| Elongation @ Break | ASTM D-882 | 250 | % |
| Dimensional Change on Heating | |||
| Film Thickness 5 to 20 mil | ASTM D-3368 | ±3% maximum | % |
| Film Thickness 30 to 60 mil | ASTM D-3368 | ±4% maximum | % |
*Represent typical performance properties and should not be used for specification purposes. Contact your Saint-Gobain Performance Plastics representative for more information.
